Joint test of 2050 heat treatment production line reconstruction project 次 2014/3/19 21:44:00 Read (3672) times 3/19/2014 21:44:00
宝钢 2050热处理生产线改造工程正式进入联动试车阶段，为 热负荷试车 创造了条件。 On January 13, the renovation project of Baosteel 2050 heat treatment production line undertaken by MCC Tiangong Group Shanghai Co., Ltd. officially entered the joint test phase, which created conditions for thermal load test .
There are 2 Baosteel 2050 heat treatment production lines. One is an open flame heat treatment production line, which is mainly responsible for tempering of steel plates; the other is a non-oxidation heat treatment furnace and quencher production line, which is mainly responsible for quenching, normalizing, and high temperature tempering of steel plates. The two lines annually produce 105,000 tons of heat-treated finished steel sheets. In this joint test, both the high-temperature furnace and the open flame furnace were tested for cold load linkage. At the same time, the project ’s 6 kV high-voltage power supply and distribution also completed a set of FC (filtering device) debugging tasks during the overtime of the commissioning staff. The main function of this filtering device is to stabilize the bus voltage, improve the power factor of the power grid, Improving grid efficiency, reducing line losses, and eliminating grid harmonics play a major role. At present, the water system, gas system and compressed air system of the project have all been commissioned. (MCC Group)